Sticker on board said...c 1993 DUTECH SHADOW FIGHTERS

Top Board
Intel I860 XR processor
MB8298-25P-SK RAMS x12 (silkscreen said 62256)
Analog device ADV476KN50E (silkscreen said BT476)
20 MHZ Oscillator

.t1 - 574200D closest to the i860 processor
.t2 - 574200D next to .t1
.t3 - 574200D next to .t2
.t4 - 574200D next to .t3

.t5 - palce24v10 closest to the i860 processor - saved in jedec format
.t6 - palce24v10 next to .t5 - couldn't read - device failure

Bottom Board
Motorola MC68000P12 processor with 12 MHz Oscillator close to it (silkscreened SNDCPU)
Motorola MC68000P12 processor with 12 MHz Oscillator close to it (silkscreened CPU)
20 MHz Oscillator - mounted on top of 7432
Harris ADC0804LCN x2
4 MB8298-25P-SK RAMS off by them selves
1 CXK58257SP-10L at each end of the SNDCPU ROMS and the CPU ROMS (4 chips total)
Motorola MC6845P chip
8 empty 32 pin EPROM sockets
Quite a bit of factory looking re-work (jumpers, cut pins, stacked IC's)

.b1 - 27C010A - closest to pin 1 of SNDCPU (dump was mostly filled with 0xFF)
.b2 - 27C040 - next to .b1
.b3 - empty socket next to .b2
.b4 - empty socket next to .b3
.b5 - empty socket next to .b4
.b6 - 27C040 - next to .b5
.b7 - empty socket next to .b6
.b8 - empty socket next to .b7
.b9 - empty socket next to .b8
.b10 - 27C010A - next to .b9 (last socket) (dump was mostly filled with 0xFF)

.b11 - Dallas DS1220Y - closest to pin 64 of CPU - read as a 2716 - (silkscreen said 6116)
.b12 - 27c040 - closest to .b11
.b13 - empty socket next to .b12
.b14 - 27c040 - closest to .b13 - bad save, file was wrong size
.b14a - 27c040 - closest to .b13 - replaces .b14
.b15 - empty socket next to .b14 (last socket)

shadow.bmp is a graphics dump
shadow_1.bmp is a graphics dump
shadow_2.bmp is a graphics dump